Friday, 6 June 2008

2d from 3d

Now lets move on a bit and select those edges! How would you do that? Well the answer depends on the software package you use. A good free program Ive always loved is wings 3d, which they say is a subdivision modeling application. I use this in conjunction with xsi foundation, which is a high top of the market range modeling program. It would be unfair for me not to give credit to Milkshape 3d which I also own, and was the first one I learnt with.
As time goes on , as a 3d modeler, you would find that your choice of software would be influenced by your need to produce work at a faster rate. If you are not working for any big games company, which can supply you with the needed tools, then the size of your wallet may be the limiting factor, and that's where packages like wings 3d, and Blender 3d come to the rescue. I would encourage any of my readers to search the web, don't give up if you don't seemingly have the tools you like, you can establish a world class workflow, by combining two or three free programs. If you have any comments or suggestions about the perfect free program workflow, please post a comment on it.

(fig 7)
The above figure shows how the edges have been selected. Some people may be baffled as to which edge to, and not to select. Have no fear , if that person is you, I want you to stop what you're doing right now, grab an orange or clementine, and try to peel of the entire skin , without any breakages, in one go. When you've done that, lay it flat on a table. Now that is what we are trying to do here, to an extent , because we've "peeled our 3d model" and layed it out , the only exception is that we did not make it in one entire piece, so to make things fairer on you, my dear readers, just cut a little segment off from that orange peel, but still lay it flat next to the rest!
With time and practice you will know which edges to select. There are really no hard and fast rules other than : try to make the layout pieces large, and avoid too many small bits. Another little experiment would be for you to get a primitive cube, and try selecting the edges that would result in the cube or box being spread out flat.




(fig 8)

Always remember, this is a challenge blog, where I am personally modeling art works posted by you, the reader. Your comments with artwork attached would influence the direction of this blog. I'll just remind any reader that I would not model anything apart from what I pointed out earlier,: ie, you have to send me a 2d drawing of a gun or super cosmic rifle that some alien would use. The drawing would have to surpass the one I drew and am modeling above in terms of its meanness.
The models intended use is for a low poly realtime engine of any game, and once its finished, it will be made available for free to all people reading this blog. It may take 4 minuets to draw a picture, but really much longer to make a 3d model, so if you re a game artist looking for some help in their modeling project, here's the place to be.
(fig 8) shows the model and drawing side by side, prior to the splitting process.


(fig 9)
And now, after running the UV program, we have our UVs. Just to point out before we proceed, if you are interested in getting your 2d character drawings, modeled out, for use and free download within this small blog we have running, visit my earlier blog at http://3dtek.blogspot.com where I have activated a low poly 3d character modeling challenge. The guidelines are outlined there. So summing this post up, by laying down our UV, we have got our " 2d from 3d ".

Thursday, 5 June 2008

Blocking Out

This post shows three steps towards the process of what I call the blocking out phase. Our 3d mesh has to be formed around the shape of the drawing. So we keep on selecting edges or points, and manipulating them to conform to the shape we want. The good thing about modeling character accessories like this one is that there are no moving parts that need animating, so the geometry does not have to be complicated.
(fig 4)
The basic shape has been attained in the figure (fig 2) below, so now my main objective here is to get rid of unneeded edges that would add to the polygon count. If you notice, there are quite a few unneeded ones along the side of the object, near the handle, so we merge them .............




(fig 5)
The model is looking good now. One thing you should know about computer games is that the modeling of assets used within the game is influenced by the intended purpose of use. So foe instance, if this 3d model was intended to be seen only from a far distance, then it would be a complete waste of time and effort of you decide to " go to town " in adding as much detail as possible. Most of the detail would come from the texture map, and the size/ resolution of that map is important when considering engine resources and loading/ refresh times, so I think we should meet mid-way, and go for a texture size of 512 by 512 for this project.


(fig 6)

The basic shape has been modeled, now we are going to select the edges, so we can unwrap the model and form our UVs. This means that we are going to form complete a 2d representation of our 3d object, on (for our purposes) a 512 by 512 texture, which would be painted on with a paint program like the gimp , photoshop, or paint shop pro.

One simple trick that a lot of texture artists may use is to paint on a canvas that is a bigger multiple of the one you finally need,. When its finished, they reduce it to the smaller dimensions. Whilst some of the resolution is lost by this practice, its advantage lies in that it gives the painter a greater degree of control during the painting process.

Wednesday, 4 June 2008

Let the Challenge Start!

Okay , now we have our rough sketch in front of us, we have imported it into our 3d modeling program for the work to start. I'm going to assume that any one reading this would have an idea as to how to bring up a reference photo in their chosen application, and at the same time, prompt any reader to remind me to write a blog or sub-blog (what ever that may mean) on the topic, as I really do not like making assumptions , (and should not be).

I am aware that there are a lot of tutorials on the Internet regarding processes like these. Some are very detailed, but because we are a bit limited with resources here, and this blog is actually a challenge blog, I will be noting the salient points as much as I can. Note this, and always remember: The purpose for which the model is created completely determines the modeling techniques used to make it.



(fig 1)

For now, lets aim for making real-time low polygon models, which would mean we would like our model to have a very low number of polygons, we have to avoid unnecessary geometry. (fig 1) Shows we have started by using a cylinder primitive, which is shaped to the general shape of the object. Edges are selected, and extruded, there's nothing complicated with the process, just remember to add more geometry at places where the model would need to branch out, say the handle for instance. Traditionally, modelers would use different viewpoint images to model, ed the front , side, and top view images.
The beauty of creating unique objects is that you don't have to follow those rules. You can make things up as you model along.

(fig 2)
The above figure demonstrates the blocking out process. Don't be afraid to block out, go for it, remember to save your work as you go on, preferably as a second file, which you are constantly updating as you go along. I rotated the image a bit so you can get a glimpse of the cross-section. The absence of a front image would not affect the progress in any way. There is only one disadvantage of modeling a low-poly mechanical weapon, namely, you would need a very good texture to make it look good. Some game engines make use of normal maps, which are maps generated by the projected normals from a low polygon object to a higher one. The map looks like the highly detailed object, and this is what is attached to the low- polygon item, and rendered in the real time environment. Its extra work creating normal maps as you essentially need two objects , a basic, and a detailed mesh, and that would greatly extend your work load as a 3d model creator. There are situations where it cant be avoided, in order for you to get the end results you need, and keep up with the competition.

(fig 3)
We are making a simple fun low poly 3d gun, for basic use, so we will stick to textures. Above, we have started shaping the upper part of the weapon. There should be no holes or incomplete geometry on a real-time model, so we have to make it all in one piece. I am actually trying to finish the model before the first challenge from any readers comes in. Remember, when you post your drawings to me, try to make the weapon as mean as you possibly can. The first one in that meets these simple rules, gets modeled on this blog, so get drawing folks!
Next I will go into more detail, and sumarise the modeling of this first opening project.



Tuesday, 3 June 2008

Drawings And outlines

As usual , with any 3d modeling project , you have to have some kind of reference image of some sort to start with. This may range from either a simple drawing/ sketch in your head to a complex blueprint with precise dimensions. The objective of this very blog is to create the most outrageous , dangerous , mean , you name it , futuristic gun ever imagined in the entire cosmos. I will start of with what I can conjure up , as at now. If you are a reader, and have a drawing which you feel looks meaner and tougher , then leave a comment , with a link for me to download and place your image on this blog , where I will make an attempt to model it. I will place the final render on this blog , and also try to provide a link to where all readers can download the model for free. So here we go:

I drew this rough sketch of some kind of alien weapon. It took me about 5 minuets to do , I actually don't think its scary enough, so until I receive a meaner more deadlier looking gun sketch, we would be modeling this one.

Lets start by analysing the morphology of this weapon. Just looking at it , you can draw inferences about the kind of creature that may be using it

(1) The user has to be humanoid in appearance.

(2) Although the sketch does not really show much, but does indicate a humanoid user,its clear that the weapon may not fire conventional bullets, as the shape is a bit odd. Perhaps some kind of highly charged plasma field, or laser is projected from its nozzle? Such a weapon would have a lot more reserve than the conventional firearm, thus any character in reality wouldn't really need to carry much...but we're dealing with 3d games, and virtual reality, so you know that we would always try to provide our virtual soldiers and warriors with as much padding and equipment as the game engine allows!

So on to the modeling in our next step

Monday, 12 May 2008

Introduction

Alright , now who in the 3d world of computer games has not in the past awed at the variety of weapons at the disposal of both the good and the bad guy in the real time environment? I certainly have. I decided to embark on a 3d modelling journey on my blogs, to model things that I would like to have seen in a game setting.
A good weapon is certainly one of them. I own several games, and do like modelling mechanical/non organic shapes. Here, I'm going to conceptualise and model a weapon, a low polygon weapon of course, using some of the principles I outlined in my earlier blog (2 worlds) at http://3dtek.blogspot.com/.
Ive sort of changed the view of my blogs, I guess this new look suits the purpose properly. Bye for now, and I'll be seeing you all shortly.